Sprockets and pinions

As Europe's largest original equipment manufacturer, we are proud to say that we always have our finger on the pulse of time and the latest developments.

We supply aluminum sprockets, steel sprockets and pinions.


Due to the close connection to the original equipment, our aftermarket products are also of the same quality.
You can find more information in our applicationlist and/or in the product overviews.

Have fun browsing.
» Applicationlist

Product overview


Sprocket Steel

ESJOT sprockets were developed especially for the high OEM requirements and are among the best on the market worldwide. A special steel, a special coating as well as a precise toothing in the Diamond Cut 2.0 process ensure an extraordinary high quality and durability. Optimally suited for the wear-intensive conditions in all areas.

  • Flatness and concentricity accuracy less than 0.1mm
  • Made of high quality and high strength steel
  • Special surface treatment
  • 100% Made in Germany
  • Diamond Cut 2.0
Different color variations
50-32001-50LB-01.jpg
50-32024-50LG-01.jpg
50-32041-50LY-01.jpg
50-32045-51LR-01.jpg
50-32065-50LO-01.jpg

Ultalight Steel L

  • More than 35% lighter than a normal steel sprocket
  • Available in six different colors (L = standard black)

  • Available for all common off-road models
  • Perfect alternative to an aluminum sprocket (higher mileage with less additional weight)
  • Flatness and concentricity accuracy less than 0.1mm
  • Made of high quality and high strength steel
  • Special surface treatment
  • 100% Made in Germany
  • Diamond Cut 2.0
Ducati1.JPG
Ducati2.JPG
50-32075-39.jpg

Steel Ducati "light"

  • Machined on CNC
  • Milled from the solid
  • Diamond Cut 2.0
  • Made of high quality and high strength steel
  • Flatness and concentricity tolerances less than 0.1mm
  • 100% Made in Germany

Different color variations
51-32065-49AO.JPG
51-32065-52BP.JPG
51-32147-45AO-01.jpg

Aluminium Sprocket

ESJOT aluminium sprockets have been developed especially for the tough conditions in Motocross, Enduro and road use. Compared to conventional steel sprockets, an ESJOT aluminium sprocket brings a weight saving of over 60%. The use of high-quality aluminium (7075 T6), which is also used in aviation, as well as the extremely low manufacturing tolerances ensure an extraordinarily long service life.

  • Over 60% lighter than a conventional steel sprocket
  • Made on precision CNC machines
  • Flatness and concentricity tolerances of less than 0.1mm
  • Made of high quality and high-strength aluminum 7075-T6
  • Special surface treatment
  • 100% Made in Germany
  • OEM Quality
  • in silver, black (BP) and orange (AO) anodized in the program
Different color variations
51-32045-48SR.JPG
51-32001-48SBL.jpg
51-32024-48SSG.JPG
51-32041-48SY.JPG
51-32065-50SO.JPG

Aluminum Sprocket Colored

  • Two-color effect through subsequent processing
  • Available in 6 different colors ( SB, SG, SR, SBL, SO, SY )
  • Available for all common offroad models
  • By special powder coating in original colors matching the manufacturers
  • Over 60% lighter than a conventional steel sprocket
  • Made on precision CNC machines
  • Flatness and concentricity tolerances of less than 0.1mm
  • Made of high-quality and high-strength aluminum (7075 T6)
  • 100% Made in Germany
  • OEM Quality
Different color variations
53BO.jpg
53BY.jpg
53 BR.jpg
53 B.jpg

Aluminium Sprocket X-Wing

  • Maximum weight saving through exclusive design
  • No closed center hole
  • Made on precision CNC machines
  • Different color variations to match the corresponding manufacturers/models
  • Over 60% lighter than a conventional steel sprocketMade on precision CNC machines
  • Flatness and concentricity tolerances of less than 0.1mm
  • Made of high quality and high-strength aluminum 7075-T6
  • Special surface treatment
  • 100% Made in Germany
  • OEM Quality

Pinion

ESJOT pinions were developed especially for the high OEM requirements and are among the best sprockets on the market worldwide. A special steel, a high-quality case hardening as well as a precise toothing ensure an extraordinarily high strength and durability - optimally suited for the wear-intensive conditions in all areas.

  • High strength steel
  • Machined on CNC lathes
  • State-of-the-art broaching machines guarantee an exact fit on the drive shaft
  • Parts are hardened after machining
  • Radial and axial run-out tolerances of less than 0.1mm
  • 100% Made in Germany
  • OEM Quality

Sportpinion (S)

  • Weight optimization through lightening holes and additional screw-in
  • Specially optimized for the racing sector
  • No negative effects on mileage despite maximum weight reduction
  • High strength steel
  • Machined on CNC lathes
  • The most modern broaching machines guarantee an exact fit on the drive shaft
  • Parts are hardened after machining
  • Radial and axial run-out tolerances of less than 0.1mm
  • 100% Made in Germany


Rubberized pinions (P)

  • Proven reduction of running noise
  • The through holes allow the rubber to form a firm bond during vulcanization
  • Many years of original equipment experience
  • High strength steel
  • Machined on CNC lathes
  • State-of-the-art broaching machines guarantee an exact fit on the drive shaft
  • Parts are hardened after machining
  • Round and axial run-out tolerances of less than 0.1mm
  • 100% Made in Germany
  • OEM Quality

Moped

  • Through the long company history of ESJOT we have a lot of experience in the moped sector.
  • We were original equipment manufacturers for Kreidler, Hercules, Sachs and many other brands and still offer one of the most extensive product ranges.
  • Please contact us.....

Screw sets

  • Sprocket bolts in set of 6 for all current MX bikes in best quality.
  • Screws M8 x 30 mm
  • Nuts M8 with collar
  • Order number 84-1046